BladePrint

Blade profile finder
Profile Finder

Your blueprint for blade profiling.

BladePrint turns a player's size, skill and style into a clear plan for their skates. Answer a few quick questions and you'll get the exact profile to ask for on your shop's machine, along with the radius, pitch and hollow that go with it. New to profiling? Start with Profiling 101.

Player inputs

Results update instantly as you go.

Position

Age group

Size

Stamped on the holder or steel (e.g. “263”). Skate sizes shown are approximate and vary by brand. Profile templates come in sizes, so this matters.

Skating ability

Style of play

Skating stance

What matters more?

Tight turns & quicknessGlide & stability

Anything feel off on current skates?

Leave all unchecked if the skates feel fine or they're brand new.

Your shop's profiling machine

Ask the shop, or look for the logo on the machine. Profile names differ by system.

Recommendation

LIVE
Rocker radius
—
Pitch / balance
—
Hollow (ROH)
—

Ask your shop for

← more agilemore glide & stability →

Curve exaggerated. Shaded area ≈ blade on the ice.

Why

    01 · Profiling 101

    What is blade profiling?

    Profiling reshapes the bottom of the skate blade from heel to toe. That shape decides how much steel touches the ice, where the player balances, and how the blade behaves through every stride, turn and stop.

    The blade is a slice of a giant circle

    Look at a hockey blade from the side and the bottom isn't flat. It curves up toward the heel and toe like a rocking chair. That curve is called the profile, also known as the rocker or contour. It's measured as the radius of the circle the curve belongs to, in feet.

    FIG 1.1 · A 10′ radius means the blade's bottom follows a circle 20 ft across. Curve heavily exaggerated.

    Only the middle of the blade touches the ice at any moment. The rest lifts away a few millimetres at each end, which lets the player rock forward for push-offs and back for turns.

    Profile vs. hollow: two different things

    People mix these up because both are measured as a radius. They're cut in different directions and do different jobs.

    Side view

    Profile (rocker)

    The heel-to-toe curve, measured in feet (e.g. 10′). It controls agility vs. stability and lasts many sharpenings.

    Front view

    Hollow (ROH)

    The groove across the bottom, measured in inches (e.g. ½″). It controls bite vs. glide and is redone every sharpening.

    The four zones of a blade

    Bauer's ProSharp splits every blade into four working zones. Multi-radius profiles give each zone its own curve, so one blade can do several jobs well.

    FIG 1.2 · Each zone handles a different part of the stride.
    Heel

    Stability

    Balance and control. Where the player sits for backward skating and hard stops.

    Rear-middle

    Speed

    Power through the length of the stride, and top-end glide.

    Front-middle

    Transition

    Pivots, cutbacks and quick changes of direction.

    Toe

    Acceleration

    The first explosive strides from a standstill.

    Why profile at all?

    • Factory steel is one-size-fits-all. Most stock player steel is roughly a 9′–11′ single radius, depending on brand and model, whatever the player's size or style.
    • Hand sharpening drifts. Every manual sharpen removes a little steel unevenly. Over time the profile can get rounded or flattened, and the balance point can move.
    • Players change. Kids grow and gain weight, and players switch positions. The right shape at 70 lb isn't right at 140 lb.
    • It's the biggest skate change you can make without new skates. Players usually notice it within a few skates.
    Bottom line: profiling doesn't replace skating technique. It removes the friction between the player's technique and their steel.

    Explore the guide

    02 · Radius

    Radius: agility vs. glide

    The radius number is the main trade-off in profiling. A smaller number gives a rounder blade with less steel on the ice. A bigger number gives a flatter blade with more steel on the ice.

    Radius explorer

    Drag to see how the curve, contact patch and toe/heel lift change. Numbers assume a 272 mm blade and are approximate.

    10′
    Toe / heel lift—
    Contact @1 mm—
    Feel—

    Lift = how far the blade ends rise off the ice (sagitta, L²/8R). Contact = length of steel within 1 mm of the ice, roughly how much blade bites when loaded (2√(2Rd)).

    What each radius feels like

    RadiusFeelTypical fit
    7′–8′Very rounded. Spins and pivots on a dime, but limited glide.Small kids on short blades, very agile forwards
    9′Quick and nimble. Easy tight turns and crossovers.Youth, light players, shifty forwards
    10′–11′Balanced all-rounder. Close to many factory profiles.Most teens and adults, two-way players
    12′–13′Flatter. More glide, stability and top speed.Bigger players, defense, speed forwards
    14′+Very stable but slower to turn.Heavy defenders, specialist setups
    22′–30′Goalie territory. Long and flat for lateral pushes.Goalies

    Single radius vs. multi-radius

    A single radius uses one curve for the whole blade, so you have to choose between agile and stable. Multi-radius profiles blend two to four curves, usually tighter at the toe for acceleration and longer toward the heel for speed and stability. Ellipse and flat profiles go further, with a constantly changing curve or a truly flat middle.

    FIG 2.1 · Profile families. Each colour is a different radius zone (toe on the right).

    Blade length changes the feel

    The same radius feels different on different blade sizes. A 10′ radius on a short youth blade barely lifts at the ends and feels flat. On a long senior blade the ends lift much more and it feels rounder. That's why kids usually need smaller radii, and why multi-radius templates come in sizes (3XS–L, SM/MD/LG). See Sizing & care.

    03 · Pitch

    Pitch: where the player balances

    Pitch, also called balance point, lie or pivot point, is where the lowest point of the rocker sits along the blade. Moving it forward or back tilts the player even though the boot hasn't changed.

    Forward, neutral, back

    FIG 3.1 · The ▲ marks the pivot, the lowest point of the curve. Toe is on the right.
    Back

    Heel-weighted

    More upright and stable. Easier backward skating. Helps players who feel tipped onto their toes.

    Neutral

    Centred

    The pivot sits under the middle of the foot. The default for most players.

    Forward

    Toe-weighted

    A more aggressive, attacking stance and quicker starts. Helps players who sit back on their heels.

    How the machines handle pitch

    SystemPitch control
    ElitePitch settings: N (neutral, 0 mm), P1 (~8 mm), P2 (~16 mm), P3 (~24 mm), applied to any profile.
    ProSharpBuilt into the template. Ellipse, Zuperior and Quad templates have a set pivot offset (for example −20 mm on the adult sizes). Ask the shop about adjustments.
    CAG OneSet by where the flat sits. More of the flat ahead of centre means more forward pitch (e.g. 30-40 is more forward than 20-40).
    TemplatesDepends on the operator and fixture. Ask whether they can shift the pivot.
    Boots have pitch too. Some skate models already lean the player forward through the boot and holder. Judge pitch by how the player feels on the ice now, not by a number alone.

    Signs pitch is off

    • Falling back, sitting on the heels, short choppy stride → try more forward pitch.
    • Feeling tipped forward, catching the toe, hard to skate backward → move toward neutral or back.
    • Different feel left vs. right → the skates may not match. Ask the shop to check both.
    04 · Hollow

    Hollow (ROH): bite vs. glide

    The hollow is the shallow groove ground along the bottom of the blade, creating an inside and an outside edge. It's set every time the skates are sharpened and works alongside the profile.

    Deep vs. shallow

    FIG 4.1 · Cross-section of the blade. A smaller wheel radius cuts a deeper groove and sharper edges. Depth exaggerated.
    Deeper · smaller number

    ⅜″ – ½″

    More grip, quicker starts and tighter turns, but more drag. Common for lighter and younger players.

    Shallower · bigger number

    ⅝″ – 1″

    More glide and speed, more forgiving and easier to slide stops. Common for heavier players and goalies.

    How deep is "deep"?

    Groove depth for common hollows on ~3 mm wide steel. The differences are tiny, which is why consistency between sharpenings matters.

    ROHDepthFeelTypical user

    Flat-bottom V (FBV)

    FBV grinds a flat centre with angled edges instead of one round groove. It aims for the bite of a deeper hollow with the glide of a shallower one. Shops match FBV cuts to ROH equivalents. Binnie's Hockey, for example, publishes this chart:

    FBV cut≈ ROHFBV cut≈ ROH
    100/753/8″85/111/16″
    95/17/16″90/753/4″
    100/501/2″95/507/8″
    92/759/16″90/501″
    90/15/8″

    Hollow + profile work together

    • Flatter profile → consider a shallower hollow. More steel on the ice already adds grip, so a deep hollow can feel grabby.
    • Flat-centre profiles (CAG, Glide Surface) are often paired with a slightly shallower hollow.
    • Soft or warm ice? Go a touch shallower. Hard, cold ice? A touch deeper.
    • Flare blades need an adjusted hollow because of their flared base. Tell the sharpener.
    • Change one thing at a time. Profile first, then fine-tune the hollow.
    05 · Machines

    Profiling machines & their menus

    Each system names its profiles differently. Ask your shop which machine it has, then use the matching names.

    Template-based · most common

    ProSharp Bauer (AS2001)

    The most widespread profiling system. It works from physical templates and comes in three performance families plus singles and duals.

    Agility

    Zuperior

    Triple radius. Feels more on the toes, with quick agility and acceleration. Sizes 3XS–L.

    Power

    Quad

    Four radii. Centred balance and long powerful strides. 3XS–XS, then Zero / 0.5 / I / II.

    Dynamic

    Ellipse

    An elliptical curve with seamless transitions. 3XS–XS, S/M/L (formerly Zero / I / II).

    ProfileRadiiHolder (mm)
    Quad 3XS4′–5′–7′–10′212–221
    Quad XXS5′–7′–9′–11′230–238
    Quad XS6′–8′–11′–12′246–254
    Quad Zero6′–9′–11′–13′221–263
    Quad 0.58′–10′–12′–14′246–280
    Quad I6′–9′–12′–15′254–280
    Quad II7′–10′–13′–16′263–296
    Zuperior 3XS / XXS / XS5′–9/10/11′–13′212–254
    Zuperior S / M / L6′–12/13/14′–20′253–306
    Win 1 · Win 29.5′–10.5′ · 10′–11′—
    Combi 9–10 · 10–139′–10′ · 10′–13′—
    Toronto 1 / 2 / 37–10′ · 9–15′ · 11–17′—
    Glide Surface 50 / 6511′ – 50/65 mm flat – 11′—
    Singles8′ – 19′—

    Holder ranges as listed by Binnie's Hockey's ProSharp menu. Ranges vary slightly between sources, so confirm with the shop.

    CNC-style · NHL-level

    Elite Blade Performance (E-P3)

    Elite's profiler is also behind TRUE's performance steel. Its profiles use "EL" catalog names and come in SM / MD / LG sizes, with separate pitch settings (N, P1–P3).

    ProfileRadiiCharacter
    EL3.1 · Triple.16′–12′–16′Agile toe, flatter heel. A popular all-round first profile.
    EL3.2 Triple6′–13′–26′Short toe, very long heel. Aggressive acceleration plus stability.
    EL4.1 · Quad.16′–9′–11′–13′The lightest-feeling quad, with a slight forward pitch.
    EL4.2 · Quad.27′–10′–13′–16′Maximum stability and top speed.
    EL4.3 / 4.4 / 4.56–9–12–15′ · 6–9–11–26′ · 8–10–12–14′Further quad variations.
    PolarisproprietaryNewest quad: speed and stability with good agility.
    SCS-1 / 2 / 3centre-glideFlatter middle with rockered ends. SCS-1 is the most agile.
    Duos7–12′ … 10.5–11.5′Two-radius options. 9.5–10.5′ is closest to stock.
    Goalie24–28′ · 26–30′ duo · 28′ / 30′ monoGoalie-specific.
    Flat-centre

    CAG One

    CAG One doesn't change the radius. It grinds a flat spot, like a speed skate's, into the middle of the blade. Codes look like 25-40. At most shops the second number is the total flat length in mm and the first is how much of it sits ahead of centre, so 20-40 is neutral and 30-40 leans forward. Shops differ on this, so confirm with yours.

    FIG 5.1 · CAG 25-40: a 40 mm flat with 25 mm ahead of centre (slight forward bias).

    Typical menu (Binnie's): 15-25, 15-30, 20-35, 20-40, 25-30 … 35-65, 40-60.

    Templates

    Blademaster & others

    Single radii (commonly 9′, 10′, 11′, 13′) and simple combos like 9′/10′ and 10′/11′. Fine for most rec players.

    06 · Sizing & care

    Blade sizes, timing & upkeep

    Multi-radius templates are sized to blade length, so knowing the holder size matters. Keeping a profile also takes a little care.

    Find your blade size

    The holder or steel is usually stamped with its length in millimetres (e.g. 263). Skate sizes below are approximate and vary by brand.

    Holder≈ Skate sizeProSharp sizeElite size

    When to profile

    1. New skates or new steel. Replace the factory profile with one that fits the player.
    2. Growth spurts or big weight changes. Kids often need a re-profile with each new skate size.
    3. Something feels off. Heels, toes, wobbles, or turns that suddenly got harder.
    4. After many hand sharpenings. Ask the shop to check the profile against a gauge or template.
    5. Position or role change. Moving from forward to D, or into a higher level.

    Keeping your profile

    • Automated sharpeners such as ProSharp, Elite and Sparx are built to keep the existing profile from sharpening to sharpening.
    • Sparx at home or with the team: Sparx is an automated sharpener with swappable grinding rings for different hollows, including a flat-bottom option. It holds the profile you already have very consistently, but it can't change it. Get the profile put on at a ProSharp, Elite or CAG shop first, then Sparx can maintain it between visits.
    • Hand sharpening can drift. ProSharp-profiled skates should keep being sharpened on a ProSharp system to hold the profile.
    • Profile both skates the same and have them checked as a pair.
    • Wipe and dry blades after every skate, and use soakers in the bag. Rust and nicks wear profiles faster.
    • Steel is finite. Every profile and sharpen removes steel. Watch the height above the holder.

    At the shop: checklist

    1. Ask them to measure the current profile first, so you have a baseline.
    2. Bring the "Copy for the pro shop" summary from the Finder.
    3. Confirm the holder size and the template size they'll use.
    4. Ask what hollow they recommend with the new profile.
    5. Skate 3–5 times before judging, then adjust one variable at a time.
    07 · Glossary & FAQ

    Terms & common questions

    Pro shop jargon in plain English.

    Glossary

    Profile / Rocker / Contour ROP
    The heel-to-toe curve of the blade, measured as a radius in feet.
    Radius of Hollow ROH
    The groove across the bottom of the blade, measured in inches. Smaller number = deeper groove = more bite.
    Pitch / Balance point / Pivot
    Where the lowest point of the rocker sits along the blade. It tilts the player forward or back.
    Single / Mono
    One radius for the whole blade.
    Duo / Double / Combi
    Two radii blended together, usually tighter in front and longer behind.
    Triple / Quad
    Three or four radius zones, each tuned for a job such as acceleration, transitions, speed or stability.
    Ellipse
    ProSharp's profile family that follows an ellipse instead of circles, for smooth transitions.
    Flat / Glide surface / Centre flat / CAG
    A truly flat section in the middle of the blade for maximum glide, borrowed from speed skating.
    Holder / Runner / Steel
    The holder is the plastic chassis. The runner, or steel, is the replaceable blade. Size is printed in mm.
    Template
    The physical pattern a profiling machine traces to cut a specific profile.
    FBV
    Flat Bottom V. A sharpening style with a flat centre and angled edges, used as an alternative to a round hollow.
    Edge check
    Confirming both edges are level after sharpening. Uneven edges feel like a bad profile.

    FAQ

    Do kids really need profiling?

    Not always. Young learners do fine on a matched single radius sized to their blade. Profiling starts to pay off once the skater is confident on their edges, playing competitively, or clearly struggling with balance.

    Will profiling wear out my steel faster?

    It removes some steel, more on the first profile if the shape changes a lot. After that, an automated sharpener that holds the profile removes about the same as a normal sharpen.

    How long does it take to get used to?

    Usually 2–5 skates. Bigger changes, such as going from 9′ to a long quad, take longer. Don't judge after one skate.

    Can my regular sharpener keep my profile?

    If they use a matching automated system, yes. Hand sharpening can round or flatten the profile over time. Mention your profile every time you drop the skates off.

    Should I just copy an NHL player's profile?

    Not blindly. Pros' profiles fit their size, blade length and stride. The same name on a different blade size can feel very different.

    What if I don't like it?

    You can usually go back toward your old shape, but it costs some steel. Moving to a flatter profile is easier than going rounder, because rounding means grinding more off the ends.

    Is there a "best" profile?

    No. Even shops that do this every day say there's no magic formula. The Finder gives a strong starting point, and the player's feel decides the rest.

    PROJECTBladePrint SHEET00 / 07TITLEFinder SCALENTSUNITSft · in · mm
    DRAWN FORPlayers · Parents · CoachesCHECKVerify with your skate tech
    Copied